Make your own sauna aromas: steam-distilling juniper, pine and mint

Shop-bought sauna aromas are convenient, but nothing smells like juniper you picked yourself. With a small copper steam still you can turn forest and garden plants into two products at once: a fragrant hydrosol and a few millilitres of pure essential oil. Both are perfect for the sauna.

What you need

  • A steam still — the 3 L steam alquitara is ideal for a first batch of herbs; the 5 L version holds more plant material for juniper or pine.
  • A separating funnel to split the oil from the water.
  • Clean glass bottles for the hydrosol and a small dark bottle for the oil.

In an alquitara the water boils in the bottom, the plants lie on a perforated grill above it, and the steam passes through them, carrying the volatile oils up into the condenser. Larger alembics use a botanical separation grill for the same purpose.

Which plants work best

  • Juniper berries and twigs — the classic Baltic sauna scent. Crush the berries lightly before loading.
  • Pine and spruce needles — young spring shoots give the freshest aroma.
  • Birch leaves — gentle, green, great as a hydrosol.
  • Peppermint — high oil yield, very intense.
  • Eucalyptus (dried, bought) — strong and clean.

Step by step

  1. Fill the boiler with water to the marked level.
  2. Pack the chopped plant material loosely on the grill — steam must pass through it.
  3. Heat slowly; when distillate starts to drip, keep a steady, gentle flow.
  4. Collect until the distillate loses most of its scent — usually 1–2 hours for a small still.
  5. Pour the distillate into the separating funnel, let it rest, and drain the water (hydrosol) from under the thin oil layer.

Expect a small amount of oil — a few millilitres from a full load is normal. The hydrosol is the main product and is what you will use most.

Using it in the sauna

Add a small cup of hydrosol, or just 2–5 drops of your oil, to a bucket of water and stir before each ladle. Never put pure oil directly on the stones — on a hot stove they are 300–400 °C. Our friends at Skamet explain the details in their guide to essential oils in the sauna. Good steam starts with good stones: dense gabbro-diabase sauna stones on a stove like the Skamet P-216 GL carry the scent evenly through the room.

And for the skin

Pure essential oil is too strong for the skin. Mix a few drops into a carrier oil — sweet almond or coconut oil — for an after-sauna massage oil with your own forest scent. Birch or mint hydrosol also makes a cooling face mist.

Note: this guide is about distilling herbs and plants. Distilling alcoholic spirits is regulated in most countries — check your local law.

Read also: which oils to use for skin care after the sauna — on aromaveo.

Shopping Cart
Salidzini.lv - Gudra iepirkšanāsUzticams cenu meklētājs
Meklē preces Latvijas interneta veikalos
Scroll to Top